Loading a feeder tray – Xerox 180 User Manual

Page 71

Text mode
Original mode

PAPER FACTS

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

3-11

Loading a feeder tray

To load one of the feeder trays.

Step 1.

Select the tray you want to load by pressing the Tray Unlock button
on the paper tray. The Tray Unlock button is shown in figure 3-1.
You may also select the tray through the PC UI or the printer mimic
on the printer control console. Refer to the “Lower trays and bins”
section of the “Status and print tasks” chapter for instructions.

Note:

If the printer has stopped due to a low paper condition,

you do not need to press the Tray Unlock button.

Figure 3-1.

Tray Unlock button

Step 2.

Wait until the Ready to Open indicator lights (see figure 3-2).

Figure 3-2.

Ready to Open indicator