Sample files – Xerox 180 User Manual

Page 129

JOB CONTROL TASKS

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

5-15

Sample files

Use this task to print samples of fonts, forms, logos, or graphics.

Sample files task through windows

To print sample of fonts, forms, or logos:

Step 1.

Select “Sample Fonts/Forms/Logos” from the Job Control menu to
open the Sample Fonts/Forms/Logos window.

Figure 5-10. Sample Fonts/Forms/Logos window

Step 2.

To print a sample of a font, form, or logo, either:

•

Enter the file name in the File ID field to print a sample of a font,
form, or logo stored on the system disk.

•

Select the appropriate option from the auxiliary menu next to
the File ID field to print a sample of all the fonts, forms, or logos
in the system:

—

*.FNT to print samples of all fonts at 300 spots per inch
(spi)

—

*.FRM to print samples of all forms at 300 spots per inch

—

*.LGO to print samples of all logos at 300 spots per inch.

If you want to print more than one copy of the file specified,
enter the number in the copies field.

Note:

The maximum number of copies you can print

is 32,767.

If you want to print on both sides of each sheet of paper,
select the Duplex option from the Format field's auxiliary
menu. Otherwise, the samples print on only one side of the
paper (simplex).

Select the appropriate header button:

•

Apply/Close. Apply your selection and close the
window.

•

Apply. Apply your selection.

•

Close. Close the window.