Power off the 18/36 track 1/2 inch tape drive – Xerox 180 User Manual

Page 167

OFFLINE PRINTING TASKS

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

7-21

Note:

You can also rewind and/or unload a tape using the PC UI or

system controller terminal (non-U.S. markets only). For instructions,
refer to the “Rewind/unload tape” section later in this chapter.

Power off the 18/36 track 1/2 inch tape drive

Follow these instructions when powering off the tape drive.

Figure 7-29. Ready button

Step 1.

Press and release the Ready button.

Step 2.

If a cartridge is loaded in the tape drive, unload it. (Refer to the
"Rewind/unload tape" section in this chapter.)

Step 3.

Press and release the Power switch.

Figure 7-30. Power switch

Ready
button

Power
switch