Xerox 180 User Manual
Page 194

HIP PRINTING TASKS
8-12
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
HIP Jobs Status task through system
controller terminal (non-U.S. markets
only)
Enter the following command:
HIP SHOW JOBS [parameter]
This command displays the current status of the selected jobs in the
HIP jobs queue as well as the current status of the HIP processor.
The format of the display depends on the parameter.
Table 8-2 lists each parameter and its description.
Table 8-2.
HIP SHOW JOBS command parameters and
descriptions
Parameter
Description
ABORTED
Display all jobs that have been aborted.
ACTIVE
Display all jobs in the active state: QUEUED,
ACTIVE, OQUEUED, or PRINTING.
ALL
Display all jobs in all queues.
CANCELLED
Display all jobs that have been cancelled.
COMPLETED
Display jobs in a completed state: PRINTED,
STORED, SEND, or ABORTED.
CONTINUE
Continue a previously requested display if all
jobs in the queue were not displayed.
PAGE[
n]
Divide the queue up to 20 jobs, which are
ordered from the oldest completed job to newest
completed job received.
PENDING
Display all jobs in the pending state: PENDING
or RECEIVING (but not submitted to the OCS).
PRINTED
Display the jobs in the printed state: PRINTED or
TRUNCATED.
SENT
Display all files that have been sent to the host.
STORED
Display all files that have been stored by the
host.
SUMMARY
Display a summary of the job queue. (See figure
8-6.)