Xerox 180 - Manual (Page 229)

STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 9-31
BLIMIT bin letter,sheet count
Table 9-10 lists each parameter and its description.
Separate
Use this task to cause a one-time switch to the other stacker bin
when you are in auto switching mode.
You can cancel the Separate task by either:
•
Selecting the “Separate off” option from the Printer Status
window's header auxiliary menu
•
Entering the following command:
SEPARATE OFF
Separate task through windows Select the “Separate On” option from the header auxiliary menu of
the Printer Status window.
Separate task through command line Enter the following command:
SEPARATE
Table 9-10. BLIMITL command parameters and descriptions
Parameter Description
bin letter The bin whose limit you are setting. For example,
enter A to set the limit for stacker bin A.
sheet count The number of sheets that can be sent to the bin.
The number must be between 100 and 2500.