Xerox 180 User Manual

Page 303

Text mode
Original mode

PROBLEM SOLVING TASKS

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

12-23

Figure 12-32.Cleaning the feed belt

Step 3.

Relatch the paper feeder assembly by pressing down on the bright
green dot (see figure 12-33). Slide the paper tray completely back
into the printer.

Figure 12-33.Relatching the paper feeder assembly

Step 4.

Operate the system as usual. If you are still experiencing misfeeds,
place a service call.

Note:

This procedure should be used only to correct a

problem, not as a routine maintenance procedure. Because the
belts are made of rubber, frequent cleaning with film remover will
dry them out and cause them to fail prematurely. Film remover
may be obtained from your Xerox service representative.