Xerox 180 - Manual (Page 215)

STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 9-17
Clusters task through command line To display all clusters in the system, enter the following command:
CLUSTER
To display all clusters and their preferred trays (without the current
trays), enter the following command:
CLP
To create a new cluster or edit an existing cluster, enter the following
command:
CLUSTER cl-name [SET | n | + n | - n | ALL | -ALL][/NR]
Table 9-2 lists each parameter and its description.
Note: When a current tray is added or assigned to a cluster, that
tray number is deleted from all other clusters, unless /NR is entered
with it.
Table 9-2. CLUSTER command parameters and descriptions
Parameter Description
cl-name The name of the cluster.
SET Assigns current trays to match all preferred trays
in the cluster.
n Gives specified tray(s) current status in named
cluster.
+ n Adds specified tray(s) to cluster’s current list.
- n Removes specified tray(s) from cluster’s current
list.
ALL Adds all trays to cluster’s current status.
-ALL Deletes all current trays from the cluster.
/NR Prevents tray being removed from current status
in any inactive cluster.