Xerox 180 - Manual (Page 285)

PROBLEM SOLVING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 12-5
Paper jams
The paper path is the route materials (paper, transparencies, labels,
and so on) follow through the printer from the feeder trays to the
stacker bins, sample tray, or purge tray. Paper jams can occur at any
stage of the paper path. Following a paper jam the printer stops, and
the following indications appear:
•
If enabled, the Attention light flashes.
• The Fault icon appears on the PC UI and printer control
console.
•
Messages appear on the system controller display and the PC
UI, informing you of the paper jam.
• The printer mimic on the printer control console shows the area
of the paper jam and lists instructions for clearing the jam (see
figure 12-4).
Figure 12-4. Jam display on the printer control console
Note: It is important that you clear the sheets only in the
area(s) indicated on the printer control console.