Xerox 180 - Manual (Page 135)

JOB CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 5-21
Sample
Use this task to print a single page sample of the current job being
printed.
Note the following when sampling the current job:
•
The job may be running or suspended.
• The job must be at least three pages in length for you to be able
to sample it.
• The next available page is printed twice and the extra page is
sent to the sample tray.
To get a sample, you may also:
• Press the key on the keyboard.
• Press the Sample button on the printer control console.
•
Open the I/O window, which gives you the sample option, by
chording the mousethat is, pressing both the left and right
buttons of the mouse at the same time. (Refer to figure 5-12.)
Note: A print job must be in output processing in order to obtain a
sample print. Also, you may not print samples when the sample tray
is the output destination for a job, for example, when printing
transparencies or when ordered stock is being used in the job.
Sample task through windows Select “Sample” from the Job Control menu.
Sample task through command line To print a sample of the current print job, enter the following
command:
SAMPLE