Xerox 180 - Manual (Page 34)

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 180 LPS
1-18 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Printer configurations
The Xerox DocuPrint 180 LPS is available in the following five
configurations:
1. Printer + Inverter Feeder Stacker + Feeder Stacker
2. Printer + Inverter Feeder Stacker + Feeder Stacker + Bypass
Transport
3. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker
4. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker + Bypass Transport
5. Printer + Inverter Feeder Stacker + Feeder Stacker + Feeder
Stacker + Feeder Stacker
Each of these configurations can have the following printer options:
•
7X10 enablement kit
• Input enablement device.
Note: The input enablement device is not available on the last
configuration: Printer + Inverter Feeder Stacker + three Feeder
Stackers.
Note: Each of the configurations and options above is available
with the Xerox DocuPrint 180 system.
Refer to the “Printer options” section earlier in this chapter for
information about each of the options above.
Figures 1-15 through 1-19 illustrate each of five the printer
configurations available.
Figure 1-15. Printer + Inverter Feeder Stacker + Feeder Stacker