Xerox 180 - Manual (Page 86)

SYSTEM CONTROL TASKS
4-2 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
System control tasks through windows of PC UI
To select system control tasks using the windows of the PC UI:
Step 1. Open the System Control menu icon.
The System Control menu window appears (see figure 4-1), listing
the available options.
Figure 4-1. System Control menu window
Step 2. Turn to the section of this chapter which explains the task in which
you are interested.
Note: This chapter covers operator related tasks only. For
information on any of the options not covered in this chapter,
refer to the
Xerox DocuPrint180 Laser Printing System PC User
Interface Reference.
System control tasks through command line
You can perform system control tasks by entering commands either:
•
Through the Messages window of the PC UI
• Through the system controller terminal (non-U.S. markets only).
To enter commands through the Messages window of the PC UI:
Step 1. Place the cursor in the window.
Step 2. Click once with the left mouse button.
Step 3. Enter the command.
If you are using the system controller terminal, use the keyboard to
enter the command.