Xerox 180 - Manual (Page 200)

STATUS AND PRINT TASKS
9-2 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Status and print tasks through windows of PC UI
To select status and print tasks using the windows of the PC UI:
Step 1. Open the Print Tasks menu icon.
The Print Tasks menu window appears, listing the available options
(see figure 9-1).
Figure 9-1. Print Tasks menu window
Step 2. Refer to the section of this chapter which explains the task in which
you are interested.
Status and print tasks through command line
You can perform status and print tasks by entering commands either:
• Through the Messages window of the PC UI
• Through the system controller terminal (non-U.S. markets).
To enter commands through the Messages window of the PC UI:
Step 1. Place the cursor in the window.
Step 2. Click once with the left mouse button.
Step 3. Enter the command.
If you are using the system controller terminal, use the keyboard to
enter the command.