Xerox 180 - Manual (Page 243)

FILE CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 10-5
Copy labeled tapes
Use this task to copy files residing on the system disk to tape and files
on tape to disk.
Copy Labeled Tapes task
through windows
Select “Copy Labeled Tapes” from the Files menu to open the Copy
Labeled Tapes window (see figure 10-5).
Figure 10-5. Copy Labeled Tapes window
To initialize a tape, select the Initialize header button (for 1600 bpi)
or the appropriate Initialize option from the window's header auxiliary
menu.
Note: You can initialize at either 1600 or 6250 bpi.
To copy files:
Step 1. Select the Copy option you want.
The default is Disk to Tape.
Step 2. Select the tape device from the Tape Device auxiliary menu.
Step 3. If you are copying from labeled tape to disk, select the disk unit you
want the file copied to from the Disk ID auxiliary menu.
You may use the default disk unit if you prefer.
Step 4. Enter the file name to be copied in the Input Field ID field.
•
The format is file-name.file-type.
• The default is *.* (that is, all files).