Xerox 180 - Manual (Page 248)

FILE CONTROL TASKS
10-10 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Copy unlabeled tapes
Use this task to copy files from:
• System disk to unlabeled tape
•
Unlabeled tape to system disk.
Copy Unlabeled Tapes task
through windows
Select “Copy Unlabeled Tapes” from the Files menu to open the
Copy Unlabeled Tapes window (see figure 10-9).
Figure 10-9. Copy Unlabeled Tapes window
To initialize a tape, select the Initialize header button, the Initialize
1600 bpi header button, or the “Initialize 6250 bpi” option from the
header auxiliary menu. (The Initialize and Initialize 1600 bpi buttons
perform the same function.)
To copy files:
Step 1. Select the Copy option you want.
Note: The default is Disk to Tape.
Step 2. Select the tape device from the Tape Device auxiliary menu.
Step 3. If you are copying from tape to disk, select the disk unit you want the
file copied to, from the Disk ID auxiliary menu.
Note: You may use the default disk unit if you prefer.
Step 4. Select the recording format of the tape being input. The default is
EBCDIC. You can select ASCII from the Format auxiliary menu.
Step 5. Enter the file name to be copied to or from the system disk in the File
ID field. The format is file-name.file-type.