Xerox 180 - Manual (Page 216)

STATUS AND PRINT TASKS
9-18 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Ordered stock
Ordered stock consists of paper arranged in a specific order in a
feeder tray so that it can be printed in a cycle. Prenumbered sheets
and tabs are two examples of ordered stock.
The Ordered Stock task allows you to reset the ordered stock
position in the feeder tray.
Note: Changes made in the Ordered Stock window are not
reflected when the widow is reopened. The defaults are displayed
instead.
Ordered Stock task through windows Perform the following steps:
Step 1. Select the “Ordered Stock” option from the header auxiliary menu of
the Printer Status window to open the Ordered Stock window (see
figure 9-8).
Figure 9-8. Ordered Stock window
Step 2. Select the number of the tray containing the ordered stock from the
auxiliary menu of the Tray Number field.
Step 3. Enter the ordered stock position in the Position field.
For example, to tell the LPS that page number 6 is ready to be printed
from ordered stock in tray 3, enter 3 in the Tray Number field and 6
in the Position field.
Step 4. Select the appropriate header button:
• Apply/Close. Apply your selection and close the window.
• Apply. Apply your selection.
•
Close. Close the window.