Xerox 180 - Manual (Page 274)

MAINTENANCE TASKS
11-18 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Cleaning precautions—READ BEFORE CLEANING
Note the following:
• The edges of the tape cleaner are extremely sharp. Observe
great care when cleaning them.
•
Avoid inhaling fumes from the cleaning fluids.
• Keep the cleaning solution containers tightly closed when not in
use.
• Use the cleaning solutions only in well-ventilated areas.
•
If you have sensitive skin, you may want to wear gloves when
using the cleaning solutions.
• Avoid prolonged contact with the skin.
Cleaning procedures
This section lists the steps to access and clean the tape path, and to
clean the exterior of the tape drive.
Access to the tape path
To access the tape path:
Step 1. Open the cover of the peripheral cabinet.
Step 2. Release the three turnbuckles on the tape path cover by turning them
counter clockwise (see figrue 11-22).
Figure 11-22.Releasing the turnbuckles
Step 3. Raise the cover as far as it will go.
Step 4. Press the Reset button to open the tape loading door.
Step 5. Turn off the tape drive by pressing the Power switch off.