Xerox 180 - Manual (Page 27)

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 180 LPS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 1-11
Figure 1-10. Printer control console
1 Continue button
2 Stop button
3 Sample button
4 Brightness control thumbwheel
5 Language icon
6 Clear button
7 Printer icon
8 Fault List icon
9 Tools icon
10 Guarded Tools icon
11 Message area
12 Icons area
Continue button. Press this button to resume printing.
Stop button. Press this button to stop printing.
Sample button. Press this button to cause a sample of the current
print job to be sent to the sample tray.
Brightness control thumbwheel. Use this thumbwheel to adjust
the brightness of the printer control console display.
Language icon. If two languages are available for your printer
control console, selecting this icon allows you to choose the
language for the printer control console messages.
Clear button. Select this button to clear fault messages.
Printer icon. Select this icon to display the printer mimic. (This is the
default display on the printer control console.)
Tools icon. Select this icon to display call for service information
and to adjust display features of the printer control console (for
example, alarm loudness).