Xerox 180 - Manual (Page 61)

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 3-1
3. 3 Paper facts
This chapter contains information about paper handling and
procedures for loading feeder trays and unloading stacker bins.
Important facts about paper
As the operator of the Xerox DocuPrint 180 LPS printer, you need to
be aware of the importance of taking good care of the paper used in
it. Using the correct type of paper and taking time to store and
condition it properly helps to keep your printer running at optimum
speed and efficiency, with fewer time-wasting paper jams.
For additional information about paper, refer to Helpful Facts About
Paper.
Paper storage
Follow these storage guidelines:
•
Do not unwrap the paper stock until it is needed.
•
Store the reams of paper in their carton.
• Do not leave the paper cartons directly on the floor. Place
something beneath them, for example, wooden pallets.
•
When the paper stock is taken from a storage area with a
different humidity or temperature, keep it in the room where it
will be used for at least 48 hours before loading it into the LPS.