Paper specifications – Xerox 180 User Manual
Page 62
PAPER FACTS
3-2
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Paper specifications
This section lists the paper sizes, weights, and types that can be
used in the Xerox DocuPrint 180 LPS.
Paper sizes
The following paper sizes can be used:
•
Width: 7 to 17 inches/178 to 432 mm (17 inch/178 mm paper
parallel to feed direction)
•
Length: 10 to 14.33 inches/254 to 364 mm.
A continuous range of paper sizes from the system minimum to the
system maximum is supported. Table 3-1 lists the standard paper
sizes.
Note:
7 X 10 inch/178 by 254 mm paper can be fed with the
optional 7 X 10 enablement kit installed.
Note:
The minimum paper size is only available with the optional 7
X 10 enablement kit.
Note:
Trays 1 and 2 hold 7 X 10 inch up to 9 X 14.33 inch paper.
The High Capacity Feeders hold 7 X 10 inch up to A3 and 11 X 17
inch paper.
Paper weights
The Xerox DocuPrint 180 LPS recommends 16–110 lb (60–200 gsm)
paper in simplex mode and 18–110 lb (64–200 gsm) paper in duplex
mode.
Table 3-1.
Standard table sizes
Width
(inches)
Length
(inches)
Generic name
8.27
11.69
A4
7.17
10.12
JB5
8.50
11.0
USLETTER
8.50
14.0
USLEGAL
16.54
11.69
A3
10.12
14.33
B4
17.0
11.0
17 X 11