Xerox 180 - Manual (Page 12)

TABLE OF CONTENTS
xii XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Blank display (system controller terminal) 12-27
Rasterization messages 12-27
Power failure 12-28
Status file nearly full message 12-28
Open-reel tape drive problems 12-29
Tape drive does not perform self-load routine 12-29
“OK” appears on the tape drive message display, but the loading
door is closed 12-30
“LID OPEN” appears on the tape drive message display 12-30
1/2 inch cartridge tape drive problems 12-31
Basic recovery procedure 12-31
Initial program load (IPL) procedure fails 12-31
You cannot insert a cartridge 12-32
Tape does not unload 12-33
Unloading a cartridge after a power failure 12-33
Tape winds completely out of cartridge 12-33
Message display is blank 12-34
Tape drive does not become ready 12-35
Calling for service 12-36
A. Meter reading and reporting
A-1
Meter reading and billing report A-1
Billing report through command line A-1
Billing report through windows of the PC UI A-2
Reporting meter reads A-4
Touchtone Telephone Direct Meter Read Entry System A-4
Understanding the system A-6
Entering meter read information A-8
Reviewing and changing data A-10
B. Supplies
B-1
How to order supplies (in U.S.A.) B-1
Consumable supplies table B-2
Glossary
GLOSSARY-1