Xerox 180 - Manual (Page 177)

OFFLINE PRINTING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 7-31
Rewind/unload tape
The Rewind/Unload Tape task allows you to do the following from the
PC UI or system controller terminal:
• Rewind a tape to BOT
•
Rewind a tape and unload it from the take-up reel, clearing the
tape path.
Rewind/Unload Tape task
through windows
To rewind a tape, select the Rewind header button from the Start
window. A message appears when the tape is rewound.
To unload a tape, select the Unload button from the Start window. A
message appears when the tape is unloaded.
Rewind/Unload Tape task
through command line
To rewind a tape, enter the following command:
TAPE[CARTRIDGE | TD n] REWIND
Table 7-2 lists the parameter and its description.
To unload a tape, enter the following command:
TAPE[CARTRIDGE | TD n] UNLOAD
Refer to table 7-2 for a description of the TD n parameter.
Table 7-2. TAPE command parameter and description
Parameter Description
TD n The tape drive you are using. (The tape device
identifications are set up during sysgen. Refer to
the
Xerox DocuPrint 180 LPS System
Generation Guide for additional information.)