Toshiba Tosvert VF-AS1 - Manual (Page 65)

E6581301
D-3
4
4.1.2 Setting parameters in the standard setting mode
Press the MODE key to place the inverter in this mode.
■ How to set basic parameters
(1) Selects parameter to be changed.
(Press the or key.)
(2) Reads the programmed parameter setting.
(Press the key.)
(3) Change the parameter value.
(Press the or key.)
(4) Press this key to save the change. (Press the key.)
■ How to set extended parameters
Each extended parameter is composed of an “H” and three figures that follow the f, so first select and read out the
heading of the parameter you want “H” ~ “H.” (“H”:Parameter bearing a number between 100 and
199, “H”:Parameter bearing a number between 900 and 999)
(1) Select the title of the parameter you want to change. (Press the or key.)
(2) Press the Enter key to activate the selected parameter. (Press the key.)
(3) Selects parameter to be changed. (Press the or key.)
(4) Reads the programmed parameter setting. (Press the key.)
(5) Change the parameter value. (Press the or key.)
(6) Press this key to save the change. (Press the key.)
ENT
ENT
ENT
ENT
ENT
.
Standard monitor mode
* Parameter title and the
setting value are displayed
alternately.
*
*
Select key
Used to select
item Mode key
Used to select mode
and operation level
50 kin
d
s of
st
and
a
rd
pa
ram
e
ter ar
e displ
a
yed
B
a
sic p
a
ra
me
te
r se
ttin
g
E
xte
nd
ed
p
a
ra
me
te
r
ENT key
Used to set values
and return to
previous menu