Toshiba Tosvert VF-AS1 - Manual (Page 176)

E6581301
F-64
6
Ex.1:
H
= (VI/II input), H= (disabled)
Output frequency = Reference frequency + Override (VI/II input [Hz])
Ex.2:
H
= (VI/II input), H= (disabled)
Output frequency = Reference frequency + Override (VI/II input [Hz])
2) Multiplicative override
In this mode, each output frequency is multiplied by an externally override frequency.
[Ex.1: RR/S4 (Reference frequency), VI/II (Override input)] [Ex.2: RX (Reference frequency), VI/II (Override input)]
Output
frequency
0
10V
Over-ridden frequency
HJ Output
frequency
0 10V
Over-ridden frequency
HJ
RR/S4 input
(Reference
frequency)
( )
RX input
(Reference
frequency)
( )
Reverse run
Forward run
Ex.1:
H
= (Disabled), H= (VI/II input), HOQF=(RR/S4 input), HJ=, WN=
RR/S4 input, (H=, H=, H=, CXH=)
VI/II input (H=, H=, H=, H=)
⇒ Setting of RR/S4 input: Refer to Section 7.3.1, Setting of VI/II input: Refer to Section 7.3.2.
Output frequency = Reference frequency × {1 + Override (VI/II input [%]/100)}
Ex.2:
H
= (Disabled), H= (VI/II input), HOQF= (RX input), HJ=, WN=
RX input (H=, H=, H=, H=)
VI/II input (H=, H=, H=, H=)
⇒ Setting of RX input: Refer to Section 7.3.3, Setting of VI/II input: Refer to Section 7.3.2.
Output frequency = Reference frequency × {1 + Override (VI/II input [%]/100)}
Ex.3:
Title Function Adjustment range Default setting
H Operation panel override multiplication gain ~%
Output frequency = Reference frequency × {1 + Override (H setting value [%]/100}