Toshiba Tosvert VF-AS1 User Manual
Page 203
E6581301
G-9
7
7.2.3 Setup of input terminal operation time
■
Setup of response time
Title
Function
Adjustment range
Default setting
H
Input terminal 1 response time selection (F)
~ms
H
Input terminal 2 response time selection (R)
~ms
H
Input terminal 3 response time selection
(ST)
~ms
H
Input terminal 4 response time selection
(RES)
~ms
H
Input terminal 5~12 response time selection
~ms
H
Input terminal 13~20 response time
selection
~ms
:
Setting when vector option unit or expansion terminal board option is used.
Note: The minimum setting unit is 1ms. Please input the value which omitted below the decimal point of a multiple of
2.5.
7.2.4 Analog input filter
■
Response time setting
Title
Function
Adjustment range
Default setting
H
Analog input filter
:No filter
:Filter approx. 10ms
:Filter approx. 15ms
:Filter approx. 30ms
:Filter approx. 60ms
•Function
The input/output terminal operation time setup function is used to extend response time if there is something
malfunctioning because of noise or chattering of input relay.
•Function
This function is effective to remove noise from the frequency setting circuit. If operation is unstable because of
noise, increase the time constant of the analog input filter.