Toshiba Tosvert VF-AS1 - Manual (Page 215)

E6581301
H-7
8
[Setup values of monitor indication parameters (H~H)]
Communication
No.
Default
setting
Item displayed Marking Unit (Panel)
Unit
(Communication)
FD00 Output frequency Depends on H 0.01Hz
FE02 Frequency command value Depends on H 0.01Hz
FE03 Output current E 1% or FURW 0.01%
FE04 Input voltage (DC detection) [ 1% or FURW 0.01%
FE05 Output voltage R 1% or FURW 0.01%
FE15 Compensated frequency Depends on H 0.01Hz
FE16 Speed feedback (real-time value) Depends on H 0.01Hz
FE17 Speed feedback (1-second filter) Depends on H 0.01Hz
FE18 Torque S 1% 0.01%
FE19 Torque command S 1% 0.01%
FE20 Torque current Y 1% 0.01%
FE21 Exciting current E 1% 0.01%
FE22 PID feedback value Depends on H 0.01Hz
FE23 Motor overload factor (OL2 data) N 1% 0.01%
FE24 Inverter overload factor (OL1 data) I 1% 0.01%
FE25
Regenerative braking resistance
overload factor (OLr data)
T 1% 1%
FE28
Regenerative braking resistance load
factor (% ED)
T 1% 1%
FE29 Input power M 0.1kW 0.01kW
FE30 Output power J 0.1kW 0.01kW
FE39 Optional AI2 input L 1% *2
FE35 RR/S4 input L 1% *1
FE36 VI/II input L 1% *1
FE37 RX input L 1% *1
FE38 Optional AI1 input L 1% *2
FE40 FM output C 1 1
FE41 AM output C 1 1
(FA65) Communication data output [Note 4] [Note 4] [Note 4]
FE66
Attached to expansion I/O card 1 CPU
version
- -
FE67
Attached to expansion I/O card 2 CPU
version
- -
FE76 Integral input power M 0.01(1kWhr) 0.01kWhr
FE77 Integral output power J 0.01(1kWhr) 0.01kWhr
FE00 Signed output frequency Depends on H 0.01Hz
FE02 Signed frequency command value Depends on H 0.01Hz
FE15 Signed compensated frequency Depends on H 0.01Hz
FE16 Signed speed feedback (real-time value) Depends on H 0.01Hz
FE17 Signed speed feedback (1-second filter) Depends on H 0.01Hz
FE18 Signed torque S 1% 0.01%
FE19 Signed torque command S 1% 0.01%
FE20 Signed torque current Y 1% 0.01%
FE22 Signed PID feedback value Depends on H 0.01Hz
FE37 Signed RX input L 1% *1
FE38 Signed optional AI2 input L 1% *2
FD50 Light-load high-speed load torque monitor 1 N 1% 0.01%
FD51 Light-load high-speed load torque monitor 2 J 1% 0.01%
FE31 Pattern operation group number R 0.1 0.1
FE32
Remaining no. of cycles for which
pattern operation is continued
P 1 1
FE33 Pattern operation preset speed numbers H 1 1
FE34
Remaining time for which pattern
operation is continued
0.1 0.1
FE84 16-bit BIN/BCD input value HH 1 1
Note 1: *1: Analog value entered: Analog value entered x value monitored/2047
*2: Analog value entered: Analog value entered x value monitored/1023
Note 2: If any value other than the values in the above table is specified, the number “” is displayed.
Note 3: If a negative value is specified, the negative sign “-” is displayed.
Note 4: Data set with FA65-FA79 is displayed.
⇒ For details, refer to Instruction Manual (E6581315) specified in Section 6.41.
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]
[Note 3]