UVP Life Science - Manual (Page 95)

Acquire Images
81
Lighting/Darkroom/Lens
BioLite MultiSpectral Light Source
The automated BioLite
TM
MultiSpectral Light Source is an added accessory to some systems. The
Automated BioLite has a fiber optic cable that threads into the darkroom and strictly controls the
wavelength of light shining inside the darkroom.
In the Acquisition Action Tab in the
Lighting menu is a list of functions for the BioLite. These are:
• Filter: Drop down list consists of a variety of filters defined by the user.
• Light Engine: Turn the BioLite On and Off.
• Template: A template is a group of BioLite settings, which can be saved under a common name.
Select the Template for the sample, to apply from the drop-down box.
• Intensity: Provides the range for light intensity. The intensity ranges from 0 to 100%.
• Light Table: Turns the light on for the Transillumination light or for the Epi Illumination light.
• Connect: Connects the Automated BioLite device from the software.
Using the BioLite Functions
For additional information on using the automated BioLite MultiSpectral Light Source, refer to the user
instruction manual for this unit.
• Turn on the Light Engine in the software.
• Set the Intensity of the BioLite. Select the highest intensity then move to a lower threshold if
desired.