Edit molecular weight standard in the library, Remove molecular weight standard in the library, Copy molecular weight standard in the library – UVP Life Science User Manual
Page 131
Perform 1D Analysis
117
Edit Molecular Weight Standard in the Library
•
First identify all lanes and bands in the image.
•
Select the Lane to calibrate by clicking on it. [ Edit Lanes and Bands ]
•
Select
1D Analysis Action Tab > Lane Profile menu and click Calibrate lane. A Molecular
Weight window opens.
•
In the
Step 1: Select MW standard tab select the standard to edit. (NOTE: This applies only to
standards created by users. The MW Standards included with the software cannot be edited or
deleted.)
•
Then click on
Edit.
•
The information previously entered into this window (including group, name, units, or most
commonly, weight) can now be changed.
•
Select the value, then click
Edit to change the value. Once all changes are made, then click OK.
Remove Molecular Weight Standard in the Library
•
First identify all lanes and bands in the image.
•
Select the Lane to calibrate by clicking on it. [ Edit Lanes and Bands ]
•
Select
1D Analysis Action Tab > Molecular Weight and click Calibrate lane.
•
In the
Step 1: Select MW standard tab select the standard to delete. (NOTE: This applies only to
standards created by users. The MW Standards included with the software cannot be edited or
deleted.)
•
Then click on
Remove.
Copy Molecular Weight Standard in the Library
•
First identify all lanes and bands in the image.
•
Select the Lane to calibrate by clicking on it. [ Edit Lanes and Bands ]
•
Select
1D Analysis Action Tab > Molecular Weight and click Calibrate lane. A new window
appears.
•
In the
Step 1: Select MW standard tab select the standard to copy.
•
Then click on
Copy.
•
The
Edit window will appear. Change the Name of the new MW Standard. Click on Add to enter
a new value
or click on a value and click Edit to make changes in the copy. Then click on OK.
Related Topics:
•
Applying a Molecular Weight Standard