UVP Life Science - Manual (Page 175)

Perform Area Density Analysis
161
• The Add Graph Point window appears. Area Amount can be added to each Area # defined in the
captured image. Area Volume cannot be changed since the value is automatically calculated from
the given area, and depends on the type of Intensity curve calibrated (Freeform or Standard
Optical Density).
Change Calibration Curve Graph
• While in the Intensity Calibration Curve window or the Amount Calibration Curve window, click
onto the second tab, Graph options.
• The Y-axis unit can be changed to other user-defined units such as concentration.
• The Calibration always positive check box can be checked in both windows. The Monotonic
calibration can only be checked in the Intensity Calibration Curve window.