IntelliTrack Check In/Out - Manual (Page 347)

Chapter 17
CE Batch Portable
319
Setting Batch Portable Application Options
The Batch Portable application is used to perform inventory counts and
inventory moves. The application includes setup options, which are found
in the Options screen.
Note: Application options to enable multiple sites and security are set in
the workstation application. Date and time configuration are set in the
operating system. Set the date format to a four digit year from the Regional
Settings on your device’s Control Panel.
1. Select Tools > Options from the menu. The Options screen appears.
2. When you transfer data to the handheld device, the site data, as set in
the Batch Synchronization Utility\Send Data tab will be transferred to
the handheld device. However, the default site for the Batch Portable
application is set in the Options screen. To select the default site for
handheld data collection, click the drop-down arrow in the Default Site
field and select the default site from the drop-down list that appears.
(The selected site in the Default Site field will automatically appear in
the site drop down boxes and/or as the selected site on the screens
throughout the application.)
3. Next, select a Location option.
Mark the Prompt for Location option to require a location selection
for each transaction.
Mark the Default Location option for the location selection to default
to the last location entered.
4. Mark the Show Transaction History check box to display the five
most recent transactions sequentially in a grid. If you do not mark this
check box, this feature is disabled and the transaction grid will not
appear in the Batch Portable Application screens.
2283.book Page 319 Thursday, July 9, 2009 11:26 AM