IntelliTrack Check In/Out - Manual (Page 287)

Chapter 13
CE Batch Setup
259
Reaching the Batch Synchronization Utility
Note: The Batch Synchronization Utility is reached through the worksta-
tion application. Please refer to your Quick Start Guide for information
about installing the workstation application.
After the workstation installation is complete, you may access the DMS
Batch Synchronization Utility through the workstation application.
1. Click Start > Programs > IntelliTrack > DMS > Check In-Out >
Check In-Out workstation. The DMS application appears.
2. Select Login Command Tab > Login drop-down list: select your user
name > Login. The Dashboard tabbed window appears in the Work
Area of the window.
3. Select Portable Command Tab > Synchronize CE Device Command
Set > Synchronize CE Device.
4. The DMS Batch Synchronization Portable Utility appears.
2283.book Page 259 Thursday, July 9, 2009 11:26 AM