Grass Valley Trinix NXT v.3.3.1 - Manual (Page 432)

432 Trinix NXT — Installation and Service Manual
Appendix 14 — Front-Air Vent
From the Rear Panel
1. Remove two screws from the Router’s input\output panel that are
aligned with the screws on the FAV.
2. Place the Mounting brackets over the holes and then replace the
existing screws (see
Figure 290 below).
Figure 290. Rear View of the FAV
Note The Mounting brackets can be adjusted as necessary.
Mounting brackets
Rack-Mounting holes
Trinix router
FAV