Grass Valley Trinix NXT v.3.3.1 - Manual (Page 419)

Trinix NXT — Installation and Service Manual 419
Specifications
Specifications
The functionality of the fiber Input and Output boards are similar to the
HI/HO-33300 coax input and output boards.
For the SFP specifications, see the current version of the 8943RDA/-D/-
DFR (SD/HD/3G-SDI Fiber Ready Reclocking DA), Installation manual on
Grass Valleys web site (see Contacting Grass Valley on page 4 for more
information).
http://www.grassvalley.com/assets/media/3540/
Fiber_Optic_SFP_Devices.pdf
The Trinix Fiber rear panels accept cage mount SFPs and do not use the
mounting strap designated by the "-K" option.
Supported SFP Fiber Optic Sub-Modules
The Trinix Fiber Input or Output board can be populated with one of the
SFP dual transmitter, transceiver, or dual receiver sub-modules that are
listed below in
Table 122 .
Table 122. Supported SFP Fiber Optic Sub-Modules
SFP Model Number Function
SFP-3G-M1DRX Dual receiver for 1270 nm to 1610 nm
SFP-13103G-M1DRX Dual transmitter for 1310 nm
SFP-CWDM3G-5 Dual transmitter 1310 nm and 1330 nm
SFP-CWDM3G-6 Dual transmitter 1350 nm and 1370 nm
SFP-CWDM3G-7 Dual transmitter 1390 nm and 1410 nm
SFP-CWDM3G-8 Dual transmitter 1430 nm and 1450 nm
SFP-CWDM3G-1 Dual transmitter 1470 nm and 1490 nm
SFP-CWDM3G-2 Dual transmitter 1510 nm and 1530 nm
SFP-CWDM3G-3 Dual transmitter 1550 nm and 1570 nm
SFP-CWDM3G-4 Dual transmitter 1590 nm and 1610 nm