Grass Valley Trinix NXT v.3.3.1 - Manual (Page 312)

312 Trinix NXT — Installation and Service Manual
Section 6 — Broadlinx Software
Checking Hardware Status
Follow these steps to check the hardware’s status:
1. Connect to the Routing switcher following the procedure described in
the
Normal Connection Procedure Following Network Address Configuration
section.
2. Click on the graphic of the Routing switcher front panel. A line drawing
of the Trinix frame will then appear (similar to the example shown in
Figure 228 ).
Figure 227. The Trinix 256x512 Asymmetric Frame