Grass Valley Trinix NXT v.3.3.1 - Manual (Page 286)

286 Trinix NXT — Installation and Service Manual
Section 6 — Broadlinx Software
Simple Network Settings
A Simple network is when there is only a monitor PC and a Broadlinx
board in an isolated network environment. You will need to change the
monitor PC network address to be compatible with the Broadlinx board’s
default setting. You must then browse to and configure the board to work
in your facility.
Configuring the PC’s Network Settings
The PC’s Network Settings must be compatible with the Broadlinx
board’s default values.
Follow these steps to configure the PC’s Network Settings:
1. Open the Network Connections window. (Start> Control Panel>
Settings> Network Connections)
2. Right-click the PC’s Local Area Connection and then select the
“Properties” option from the drop-down list. The Local Connection
Properties dialog will then appear.
Figure 195. The Local Connection Properties Dialog
3. Scroll down and then select the Internet Protocol (TCP/IP) setting.
4. Click the Properties button. The Internet Protocol (TCP/IP) Properties
dialog will then appear ( Figure 196 ).