Grass Valley Trinix NXT v.3.3.1 - Manual (Page 391)

Trinix NXT — Installation and Service Manual 391
TRX-VI-33100 Module
Remove Setup (On/Off) : 0 0 0 0
Chroma Kill (On/Off) : 0 0 0 0
Video Decode Mode : 2 2 2 2
AGC Enable (On/Off) : 1 1 1 1
Input Video Gain (%) : 100.0 100.0 100.0 100.0
ACC Enable (On/Off) : 1 1 1 1
Input Chroma Gain (%) : 100.0 100.0 100.0 100.0
Video Processor:
Insert EDH (On/Off) : 0 0 0 0
Contrast/Y Gain (%) : 100.0 100.0 100.0 100.0
Saturation/Chroma Gain (%): 100.0 100.0 100.0 100.0
Brightness/Y Offset (mV) : +000.0 +000.0 +000.0 +000.0
Hue/Chroma Phase (Deg) : +000.0 +000.0 +000.0 +000.0
Vertical Blanking NTSC:
Notch Decode Mode : 1 1 1 1
Chroma Kill (On/Off) : 0 0 0 0
Reserve for Data Mode : 0 0 0 0
VBI Line Pair: 10/273 : 0 0 0 0
VBI Line Pair: 11/274 : 0 0 0 0
VBI Line Pair: 12/275 : 0 0 0 0
VBI Line Pair: 13/276 : 0 0 0 0
VBI Line Pair: 14/277 : 0 0 0 0
VBI Line Pair: 15/278 : 0 0 0 0
VBI Line Pair: 16/279 : 0 0 0 0
VBI Line Pair: 17/280 : 0 0 0 0
VBI Line Pair: 18/281 : 0 0 0 0
VBI Line Pair: 19/282 : 0 0 0 0
VBI Line Pair: 20/283 : 0 0 0 0
VBI Line Pair: 21/284 : 0 0 0 0
VBI Line Pair: 22/285 : 0 0 0 0
VBI Line Pair: 23/286 : 0 0 0 0
Vertical Blanking PALx:
Notch Decode Mode : 1 1 1 1
Chroma Kill (On/Off) : 0 0 0 0
Reserve for Data Mode : 0 0 0 0
VBI Line Pair: 06/319 : 0 0 0 0
VBI Line Pair: 07/320 : 0 0 0 0
VBI Line Pair: 08/321 : 0 0 0 0
VBI Line Pair: 09/322 : 0 0 0 0
VBI Line Pair: 10/323 : 0 0 0 0
VBI Line Pair: 11/324 : 0 0 0 0
VBI Line Pair: 12/325 : 0 0 0 0
VBI Line Pair: 13/326 : 0 0 0 0
VBI Line Pair: 14/327 : 0 0 0 0
VBI Line Pair: 15/328 : 0 0 0 0
VBI Line Pair: 16/329 : 0 0 0 0
VBI Line Pair: 17/330 : 0 0 0 0
VBI Line Pair: 18/331 : 0 0 0 0
VBI Line Pair: 19/332 : 0 0 0 0
VBI Line Pair: 20/333 : 0 0 0 0
VBI Line Pair: 21/334 : 0 0 0 0
VBI Line Pair: 22/335 : 0 0 0 0
VBI Line Pair: 23/336 : 0 0 0 0
VBI Line Pair: 24/337 : 0 0 0 0
VBI Line Pair: 25/338 : 0 0 0 0
VBI Line Pair: 26/339 : 0 0 0 0
Timing NTSC:
Horizontal (pixels) : 000.0 000.0 000.0 000.0
Vertical (lines) : 000 000 000 000
Freeze Mode : 0 0 0 0
Timing PALx:
Horizontal (pixels) : 000.0 000.0 000.0 000.0
Vertical (lines) : 000 000 000 000
Freeze Mode : 0 0 0 0
Picture Enhancement:
Detail Level : 0 0 0 0
Press any key to return to the "Status Menu"
Note Vertical timing and Freeze modes are not implemented.
7.) Save or Recall a Configuration File
This selection allows a setup to be saved on the PC and recalled. For
example, if a particular source requires a video level correction, a file
named “VTR3_in7_vid_gain” could be downloaded when needed.
To Save a File On PC
This procedure assumes that video adjustments have been made (as
described above) and need to be saved for future use.
a. Select “Save or Recall a configuration file.”