Grass Valley Trinix NXT v.3.3.1 - Manual (Page 394)

394 Trinix NXT — Installation and Service Manual
Section 12 — Troubleshooting
Asymmetrical Frames
Power Supply
OPM Board
Off Supply is not powered (or is not operating)
LED Display Meaning
On The AC input is OK.
Blinking The Input is out of limit.
On The DC input is OK.
Blinking The supply is overloaded.
On This is an Over-temperature warning.
Blinking Service is required.
On There is a fault.
Display Meaning
PWR Red In use
Green In use
ALARM Red Primary alarm
Green no alarms
IN USE Red Alarm
Green OK