Grass Valley Trinix NXT v.3.3.1 - Manual (Page 302)

302 Trinix NXT — Installation and Service Manual
Section 6 — Broadlinx Software
Trinix Matrix Notifications
The Trinix-SNMP Agent software monitors the following events and noti-
fication messages are sent to all of the configured SNMP managers.
Table 59. Trinix Matrix Notifications
Signal State The state of the signal. For example, Detected or Not Detected and
so forth.
Signal Last Changed The time at which signal state was changed.
Signal Specific This is an OID and can be used to extend the signal information to
another table.
Signal Notify This information indicates the current status of Signal Alarm
Config and allows a manager to control whether or not the agent
will generate the signal state notification
Matrix Index Number This information indicates the matrix index number of current
signal.
Connector Number The current connector number of signal.
Signal Description The Signal Description, such as SD/HD Video etc.
Output Connected to The Matrix Input connector number currently connected to out-
put. If the signal is an input signal, this value will be -1.
Notification Description
Reference Signal A trap message is sent to the manager if the Trinix matrix loses
the Reference signal.
This error trap is cleared once Reference signal is restored.
Power Supply Error A trap message is sent to the manager if any error occurs in the
power supply.
This error trap is cleared once the power supply is restored to
the correct state.
Power Supply AC Error A trap message is sent to the manager if any error occurs in AC
input to the power supply.
This error trap is cleared once the power supply AC is restored
back.
Power Supply DC Error A trap message is sent to the manager if any error occurs in DC
output from the power supply.
This error trap is cleared once the power supply DC is restored
back.
Power Supply Fan Error A trap message is sent to the manager if any error occurs in the
power supply fan.
This error trap is cleared once the power supply fan is restored
to the correct state.
Fan Error A trap message is sent to the manager if any error occurs in the
fan.
This error trap is cleared once the fan is restored to the correct
state.
Item Description