Grass Valley Trinix NXT v.3.3.1 - Manual (Page 326)

326 Trinix NXT — Installation and Service Manual
Section 6 — Broadlinx Software
Verifying that the Update was Successful
You can verify that an update was successful by using the deviceListShow-
command.
1. Type
deviceListShow
At the command prompt. The device list will then appear. All updated
boards will have an asterisk by the version number.
See the example below:
2. Restart the boards.
Restarting the Updated Boards
The updated boards must be restarted for the firmware to be activated.
Follow these steps to restart the recently updated boards:
1. Type
restartFpga -1
At the command prompt.