Grass Valley Trinix NXT v.3.3.1 - Manual (Page 115)

Trinix NXT — Installation and Service Manual 115
Specifications
HI-33200 Input board (SD/HD): For SD operation, equalization
is automatic up to 300 meters using Belden 1694A or an equiva-
lent coax cable. For HD operation, automatic up to 100 meters
of Belden 1694A or an equivalent coax cable.
SI-33110 Input board (SD): equalization is automatic up to 300
meters of Belden 1694A, 250 meters using 8281 or an equivalent
coax cable for SD equalizer at 270 Mbps. Reducing to 150
meters at 540 Mbps.
HI-33110 Input board (SD/HD): equalization is automatic up
to 100 meters using Belden 1694A or an equivalent coax cable.
VI-33100 Input board (SD/HD): For digital SD operation,
equalization is automatic up to 300 meters using Belden 1694A
or an equivalent coax cable. For HD operation, automatic up to
100 meters of Belden 1694A or an equivalent coax cable.
Data Reclocking: Switch selectable on an output-by-output basis.
The HO-3G Output Board provides reclocking for 270Mbps
1.485, and 3Gp/s or non-reclocking for other data rates.
The HO-33120 Output Board provides individual selection of
reclocking On or Off for the supported data rates. The data rate
for reclocking is automatically selected by the circuitry on the
board for 1.485 Gb/s, 540 Mbps, 360 Mbps, 270 Mbps, 177
Mbps, and 143 Mbps. Other data rates will not be reclocked.
The SO-33110 Output Board is non-reclocking.
The HO-33110 Output Board provides individual selection of
reclocking for 1.485 Gb/s or non-reclocking for all data rates.
Output Jitter: 3G: HDSD:
AC Power Input
Main Connection: IEC Connector, AC separate mains input for each power sup-
ply module.
Note Each power supply must be connected to a separate AC mains branch circuit
with an over-current protector rated at no more than 20A.