Grass Valley Trinix NXT v.3.3.1 User Manual
Page 331
Trinix NXT — Installation and Service Manual
331
Table 64. F
Command
Arguments Detailed
Description
far
(char *fileName)
Archives firmware. fileName is the name of a firmware
archive.
This will display the contents of the archive file with
some file information.
finger
()
Find out who is on the bus (shows frame, slot, type,
and version)
frameTempShow
()
No Help Text (frameTemp.cc)
fwDownload
(int frame, int slot, char
*fileName)
Download a file to a microcontroller. The file is checked
to see if it is an S19 or XSVF file and downloaded
appropriately.
The device manager is suspended during the file down-
load so as not to interfere.
fwRestart
(int type)
Restart the board's FPGAs.
fwUpdate
(int category, int type)
Force loads all micro Controller and FPGA code to all
devices.
You must have the desired code loaded in the code
manager. Enter the command with no arguments for
help.
Table 65. H
Command
Arguments Detailed
Description
hardwareShow
(int verbose)
No Help Text (deviceHardware.cc)
Table 66. I
Command
Arguments Detailed
Description
inputStatusShow
(int verbose)
No Help Text (inputStatus.cc).
iod
(int lvl)
turns on or off IO debugging. Enter command with no
arguments for usage.
ipAddressShow
()
No Help Text (ipAddress.cc)
Table 67. L
Command
Arguments Detailed
Description
lbShow
(int verbose)
No Help Text (logBuffer.cc)
logFilterOff
(unsigned int f)
Turn off bits in the logging filter. f should be hex.
logFilterOn
(unsigned int f)
Turn on bits in the logging filter. f should be hex.
logManagerShow
(int verbose)
No Help Text (logManager.cc)