Grass Valley Trinix NXT v.3.3.1 - Manual (Page 291)

Trinix NXT — Installation and Service Manual 291
Encore Controlled Routers
Once the newly inserted board has booted, run the Re-Sync Comms and
Re-Sync Router
from the Encore System Configure window (Encore
User Interface> System Configure window).
CAUTION Ensure that the steps outlined above in Adding a Broadlinx Board to an
Encore Controlled Trinix Router are taken before the newly inserted board
ever becomes active or is activated! In the event the board does become
active, before these steps have been executed, immediately reset the newly
inserted Broadlinx board (NR 33000).