Grass Valley Trinix NXT v.3.3.1 - Manual (Page 415)

Installation and Service Manual415
Section
13
Trinix Fiber Option
Trinix Fiber Boards Overview
Each Trinix Fiber board provide 32 channels for both Input and Output
board sets and may be used to send or receive SD, HD and 1080p/3G
video signals through fiber optic cables. These boards use optical Input
and Output SFP modules for fiber optic connectivity.
These Small Form-factor Pluggable (SFP) devices are plugged into the
Trinix rear panel, and fit into sockets that have been designed to house
the SFPs. These SFPs may be added, removed, or changed without dis-
rupting the operation of the Trinix Routing switcher.
Both fiber-optic and electrical BNC boards can be used in the same
Trinix frame for mixed optical and electrical signal traffic. The fiber-
optic boards may be used in all of the current Trinix Routing switchers.
Note A Fiber Input card is not currently available for the 512x1024 frame.
Section Overview
This section provides the cleaning requirement, including best prac-
tices, specification information, and the installation steps for the Trinix
Fiber Input board, a Trinix Fiber Output board, and Trinix Fiber Rear
Panel.