Grass Valley Trinix NXT v.3.3.1 - Manual (Page 349)

Installation and Service Manual349
Section
9
Protected Paths
Protected Paths Overview
The Protected Path function is designed to monitor router outputs that
are feeding critical downstream equipment. In the event of signal loss,
the Protected Path function will automatically select the output that is
carrying the same signal and trigger the system alarm. The first indica-
tion of signal loss is that the LED on the front door should switch to red.
When using Protected Paths with an Asymmetrical frame, you can
protect up to half of the outputs. For Example, when protecting the
128x256 you would only be able to protect 128 outputs instead of 256.
Figure 239. Broadlinx Web Page for Protected Path Configuration (Example)
This section provides information about how to:
• Verifying the parameters on the Broadlinx boards
• Installing the application
• Accessing the Web page
• Using the different sections of the Web page
• Configuring the application to be used with Encore and Jupiter
control systems