Grass Valley Trinix NXT v.3.3.1 - Manual (Page 355)

Trinix NXT — Installation and Service Manual 355
Broadlinx Software with Protected Paths Installation
Broadlinx Software with Protected Paths Installation
These installation steps are for existing boards that do not have the latest
software. This installation process requires multiple steps, such as:
• Copying the application files to the Compact Flash cards.
• Removing and then reinserting the Broadlinx boards back into the
Trinix frame.
Note It is recommended that you remove and update one board at a time. This
method prevents previous configuration settings from being overwritten.
• Verifying the installation.
Installing Broadlinx with Protected Paths Software
Follow these steps to install the Broadlinx with Protected Paths software,
you will need to remove and update one board at a time, the Secondary
Broadlinx board first, and then the Primary Broadlinx board.
Secondary Broadlinx Board
Follow these steps to update the Secondary Broadlinx board:
1. Remove the Secondary Broadlinx board and then install the compact
flash card in the card slot on the board.
2. Insert the Secondary Broadlinx board into the frame and wait for the
Secondary Broadlinx board to start.
3. Connect to the Primary Broadlinx controller from the Broadlinx Web
page
• Navigate to the “Frame Signals: Protected Paths” page and then
click the
Enter button to save the Protected Path data file to the new
card.