Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 88)

Chapter 2 Using the Profile Configuration Manager
88 Profile Family
If you want to bypass the sample rate converter:
1. In the Digital Audio Input dialog box, click the Sample Rate Converter tab
(Figure 35). By default, the sample rate converter is enabled. The sample rate
converter affects all four channel inputs.
Figure 35. Digital Audio Input dialog box, Sample Rate Converter tab
2. Click Bypass Sample Rate Converter .
NOTE: Do not bypass sample rate conversion unless you are certain
that all inputs and outputs are synchronous.
3. After you have disabled the sample rate converter, click Close or another
tab.