Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 172)

Chapter 4 Using VdrPanel
172 Profile Family
Figure 83. Vertical Blanking Interval Storage dialog box
Setting up BVW [insert edit] Emulation
This procedure sets up a panel to emulate a Betacam. Refer to the manual for
your hardware controller device to set up Super-Edits or BVEs.
NOTE: This procedure requires access to two control ports. Close a
panel to free a control port for use with the BVW [insert edit] panel.
1. Click within a BVW [insert edit] panel to select the panel. Refer to
“Selecting a Controller” on page 161 if you have not already selected BVW
[insert edit] as the controller for this panel.