Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 192)

Chapter 4 Using VdrPanel
192 Profile Family
Record Clips First
To define a clip by recording and then naming the clip:
1. Click a panel to select it.
2. If any clips are listed in the Clips box, choose VideoClip | Eject All Clips to
clear the clip list.
3. Click the Record button in the selected Panel dialog box to begin recording.
A clip named #1 (or other number for a unique clip name) appears in the clip
list for the panel.
4. If you are in Loop or Bounce mode, the clip is limited in size to either 1,000
fields or to the last clip length specified in the Loop/Bounce Length dialog
box.
5. Click Stop to stop recording.
If you repeat these steps to record additional clips, they are named
sequentially—one higher than the previous clip. For example, #2, #3, and so
forth.
6. Choose VideoClip | Rename Clip to open the Rename Video Clip dialog
box (see “Renaming a Clip” on page 194).
7. Click on the clip to be renamed (such as #1).
8. Enter the new name in the To field. Spaces and uppercase characters are
acceptable; however, uppercase and lowercase characters will not distiguish
clip names.
9. Click OK .
Loading and Playing a Clip
To load and play a clip:
1. Click in a panel to select it.
2. If the clip is already loaded, select it from the Clips box and go to step 7.
3. If the clip is not loaded, choose VideoClip | Load Clip to open the Load Clip
dialog box.
4. If the clip you want to load is on a different drive, select a different disk drive
in the Drive box.