Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 256)

Chapter 8 Using the Tool Box Editor
256 Profile Family
The Hardware Communication Monitor tries to connect to a machine in the
project file (see “Project Files” on 257). If there is no project file present, you
will automatically connect to the local machine. Otherwise, you will go to the
Connect to Machine dialog box (see Figure 119).
To exit the Tool Box Editor:
• Choose File | Close.
A message box is displayed, asking you to confirm that you really want to exit
the application. Click on the
Yes button to confirm the exit or the No button to
cancel the quit command.
Configuring Resources
You must configure video, audio, and timecode resources before using Tool
Box Editor. You configure resources with Resource Manager. To start this tool:
• Choose Config | Resources .
For instructions on using Resource Manager, see “Using the Resource
Manager” on 313.