Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 344)

Chapter 11 Using TimeDelay
344 Profile Family
Changing the Remote Connection
To connect to a different machine:
1. Choose File | Remote Connection… to open the Remote Connection dialog
box.
2. Select one of the names in the Network Host List.
3. Click on Connect , or double-click on the name in the Network Host List.
Changing the machine connection closes the current TimeDelay project. If you
haven’t saved changes to the project, you are prompted to save before
TimeDelay makes the new connection. When the new connection is
established, the default project settings are used.
Adding Names to the Network Host List
To add a machine to the Network Host List:
1. Click the Add… button to open the “Add Network Host” dialog box.
Figure 171. The Add Network Host dialog box
2. Enter the new machine name. This can either be the host name, or the
machine’s IP address (Ex. 128.181.199.237).
3. Click OK to close the Add Network Host dialog box and add the new host
name to the Network Host List.
4. Click OK in the Remote Connection dialog box to close it and to open the
connection status dialog box, which shows the progress of any new
connections.