Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 343)

Connecting to a Remote Profile Unit
Profile Family 343
Connecting to a Remote Profile Unit
You can run TimeDelay on any PC that uses Windows NT 4.0 and connects to
a remote Profile unit over an Ethernet local area network (LAN). When
TimeDelay starts on the PC or when you choose
File | Remote Connection… ,
the Remote Connection dialog box shown in Figure 170 appears.
NOTE: TimeDelay remote connection is allowed only when
TimeDelay is running on a PC. Consequently, the “TimeDelay
Remote Connection” dialog box does not appear when TimeDelay is
launched on a Profile unit, and the
File | Remote Connection…
menu item is not available when TimeDelay is running on a Profile
unit.
To connect to a remote Profile unit:
1. Select one of the names in the Network Host List.
2. Click on Connect , or double-click on the name in the Network Host List.
The Connection Status dialog box appears while TimeDelay establishes a
connection with the selected Profile unit. If the connection cannot be
established, an error message is displayed.
• Press Cancel to return to the Remote Connection dialog box.
Figure 170. The Remote Connection dialog box